© MOBATIME
5/40
BE-801259.05-HN 60&61master clock
1.1.5 Other I / O
•
input for the connection of DCF, WWVB, MSF receiver or GPS receiver (with DCF
output)
•
SMA connector for external GPS antenna and synthetic passive DCF output on HN
61 / 61m / 61i / 61a
•
output 24 VDC with adjustable current limit to 200 mA
(for powering of bells or other devices), can serve as 24VDC power input alternatively
•
terminal for connection of external backup battery with adjustable current limit
•
mono audio output (HN 60a / 61a only)
•
GPIO with striking (up to two tones) and carillon (up to four tones, on request)
functions (HN 60m / 61m only)
1.1.6 Operation reserve
passive
•
internal backup battery for RTC in case of power loss
•
as soon as the power becomes resumed the slave clocks adjust
automatically and in an accelerated mode to the proper time, the channel state
corresponds to the actual time
active
•
internal circuit for charging the accumulators
•
optional external maintenance-free lead-acid batteries
•
energy saving mode to save the backup battery
1.1.7 Daylight saving time processing
•
via DCF receiver or by setting the time zone when synchronizing from GPS
•
respecting timezone settings
1.1.8 Design
conventional type
•
plastic box of IP 20, for mounting on a DIN rail - 6M or 9M width
for indoor use
•
mounting to a wall, IP 40
for outdoor use
•
mounting to a wall, IP 65
1.2 Accessories
•
AD 650, DCF 77.5 kHz radio receiver, for indoor and outdoor placement, standard
cable length 10 m (max. 200 m), for HN 60
•
GPS antenna for HN 61, cable length 5 m (max 30 m)
•
battery pack with maintenance free Pb accumulator 12 V / 0.8 Ah,
provides for continuous operation of the MASTER clock, including the connected
slave clocks in case of a power outage, for a period
of approx. 24 hours.
•
striking module HN..SSR2
