System Two LED Installation and Service Manual (1003385 Rev. C)
Page 52
Section 5
Adjusting the Optional Brake
– LCH Arm
Figure 30: Adjusting the optional brake
Adjust the brakes such that the Light Head or
Monitor remains stable in any set position and can
still be conveniently adjusted.
Follow the safety instructions on Page 56.
Dismantling the cover panels
1. Dismantle the cover panels as previously described
Moving the segment securing device
2. Push the segment securing device
②
forwards until
the brake screw is accessible.
Setting
Use a suitable slotted screwdriver.
To increase the brake force
Insert the slotted screwdriver into the brake screw
①
as illustrated in the Figure and turn it in the
clockwise direction.
To reduce the brake force
Insert the slotted screwdriver into the brake screw
①
as illustrated in the Figure and turn it in the
counter-clockwise direction.
3. Perform a function test.
Moving the segment securing device
4. Push the segment securing device backwards and
screw it on using 1 Phillips recessed head screw.
Make sure that the segment securing device does
not protrude from the fitting aperture
④
.
Mounting the cover panels
5. Re-mount the cover panels as illustrated.