Setting up the unit
25
Installation instructions
3. Open the cooking zone door.
4. Move the tray trolley into the unit until it stops and check the
alignment.
5. Close the cooking zone door.
The sheet metal seal on the tray trolley should make full
contact (no gaps) with the door seal.
The shelves in the unit should be horizontal.
6. Fill out the Commissioning report.
Aligning tray trolley with insertion system
The Combisteamer can be equipped with the
EasyIn
insertion
system(optional).
a
c
b
d
e
f
Image: Aligning the tray trolley with the insertion system
a Tray trolley
d Equipment leg
b Distance
e Support roller
c Guide rail
f Push handle
1. Level the unit by screwing the equipment legs in or out.
2. Open the cooking zone door.
3. Place the tray trolley against the guide rails.
4. Screw the equipment legs in or out, until the support rollers are 1
mm — 5 mm above the guide rails.
5. Retract the tray trolley.
6. Level the guide rails.
7. Move the tray trolley into the unit until it stops and check the
alignment.
The casters of the inserted tray trolley should no longer have
floor contact.
8. Remove the push handle.
9. Close the cooking zone door.
10.Fill out the Commissioning report.
10013865-0AIBE-B
Summary of Contents for FlexiCombi MagicPilot Series
Page 47: ......
Page 48: ...www mkn eu...
