MK Diamond Products 160028, Owner'S Manual & Parts List

Page: 13 / 40

13
SAFETY LABEL LOCATIONS
Safety labels contain important safety information. Please read the information contained on each
safety label. These labels are considered a permanent part of your saw. If a label comes off or
becomes hard to read, contact MK Diamond or your dealer for a replacement.
MK-377EXP SAW SAFETY LABELS
Decal/Label Location Description
A Tray - Front Warning - Dust Control
B
Motor - Top
Warning - Read and Follow Operating Instructions
C
Motor - Top
Caution - Receptacle for water pump
D Motor - Top Caution - Use with GFCI only
E
F
Motor - Front
Motor - Front
QR Codes for Manuals and Safety
Warning - Silica Prop 65
• This Equipment may produce Dust
or Mists containing Crystalline Silica.
• Employ Dust Controls and Protection
per OSHA/NIOSH/MSHA.
WARNING !
Label #164202
Part # 164202
• For Your Own Safety Read Instruction
Manual Before Operating Saw.
• Wear Eye Protection.
• Disconnect Saw Before Servicing, when Changing
Cutting Wheels and Cleaning.
• Use Tool Only with Smooth Edge Cutting Wheels
Free of Openings and Grooves.
• Replace Damaged Cutting Wheel Before Operating.
• Do Not Fill Water Bath Above Water Fill Line.
• See Manual for Pump Replacement.
!
WARNING
Label #155806
Part # 155806
Part # 154822
Receptacle is for water
pump only.
125V .6 amps max.
!
CAUTION
Label #154822
Part # 155678
!
CAUTION
This saw is to be used
with a Ground Fault
Circuit Interrupter.
Label #155678
Part # 170480
Scan for safety information Scan for manuals
Label #170480
!
WARNING:
Crystalline Silica
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Part # 172640
A
C
E
B
D
F