MJK MagFlux Installation And User Manual Download Page 51

Page: 51 / 150

Electromagnetic Flow Meter

FW: 841012/842009

Factory Settings

The "Factory Settings" menu resets the display to default settings, to met-
ric settings or to US settings.

Note:

The converter settings are not changed from this menu. Converter

settings are covered in "Converter Setup" on page

1. Press the up/down keys to highlight the required menu line (here: Fac-

tory Settings) and then press OK to select it.

Specify Main Screen
Factory Settings
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup

Back Select

Main Menu

Factory Settings

2. Press the up/down keys to highlight the required option and then press

OK to select it.

Recover Factory Settings

Cancel
Default
Set to Metric
Set to US

Back Select

Factory Settings

The available options are:

Cancel

Exit the menu without changes

Summary of Contents for MagFlux























































































































































Search results

Summary of Contents for MagFlux

Reviews:

Brands by name

Popular brands

MJK MagFlux, Installation And User Manual

Search results

Summary of Contents for MagFlux

Reviews:

Brands by name

Popular brands