manualshive.com logo in svg

MJK MagFlux, Installation And User Manual

Share
Download
MJK MagFlux Installation And User Manual Download Page 115

115

 

Electromagnetic Flow Meter

FW: 841012/842009

D.  Upgrade Converter Firmware

1.  Select "Firmware" in the menu bar and click "Converter".
2.  Locate the "MJK Field FW" directory on the CD-ROM, select the 

"842xxx-xxx.hex" file (or similar) and click "Open". 

3.  Select the required 

MagFlux

® 

(option 1, 2, 3 or 4) and click OK when 

the "Converter Firmware" dialogue box appears and prompts for se-
lecting the converter to program.

  The converter firmware is then transferred, and the converter Flash 

programming is initiated. Expect this process to take a few minutes.

4.  When the Flash programming is done, click OK on the PC and the 

MagFlux

® 

Display Unit to return to the 

MagFlux

® 

 Flow/FTot display.

5.  If required you may adjust the 

MagFlux

® 

Display Unit screen contrast 

by pressing the two outmost keys simultaneously, press the up/down 
keys as required, and save the new setting by again pressing the two 
outmost keys simultaneously.

Summary of Contents for MagFlux























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands