manualshive.com logo in svg

MJK MagFlux, Installation And User Manual

Share
Download
MJK MagFlux Installation And User Manual Download Page 13

13

 

Electromagnetic Flow Meter

FW: 841012/842009

2. Safety, Repair and Product Identification

Safety instructions 

1.  Read this manual carefully.
2.  Pay attention to the environment on the installation site.
3.  Wear necessary protective equipment and follow all current safety 

regulations.

4.  The 

MagFlux

®

 can invoke a start signal for dangerous machinery. 

Always ensure that connected machinery and other equipment are 
effectively put out of service (that is to remove the main fuses and lock 
main and security switches in off-position) before commencing configu-
ration, fault finding, servicing, maintenance work, etc.

5. 

WARNING

: There is a risk of lethal, electrical shock from "Mains sup-

ply" terminals N and L. Be careful not to touch these terminals while 
the 

MagFlux

®

 is being serviced.

Physical Mounting

The 

MagFlux

®

 flow converter/flow meter 

must not

 be mounted in  

explosion hazardous areas!

Repair

Repair must only be made by MJK or by a service representative ap-
proved by MJK.

Summary of Contents for MagFlux























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands