Mitsubishi QD60P8-G, User Manual

Page: 114 / 128

9 - 6 9 - 6
MELSEC-Q
9 TROUBLESHOOTING
(2) Error storage
If any of the settings made in the buffer memory or the setting with the intelligent
function module is outside the setting range, the error occurrence (X8 to XF)
turns ON and the error code corresponding to the error definition is stored into
the buffer memory.
By checking the "error code" of the buffer memory, you can identify the error
cause.
X/Y device
CH
Error occurrence Error reset request
Buffer memory address
of Error code
1 X8 Y8 16
2 X9 Y9 48
3 XA YA 80
4 XB YB 112
5 XC YC 144
6 XD YD 176
7 XE YE 208
8 XF YF 240
(3) Confirmation of error definitions
GX Developer or GX Configurator-CT is required to check the error definition.
For details of how to check the error definition, refer to "Section 9.1.1 Confirming
the error definitions using system monitor of GX Developer" or "Chapter 6 Utility
Package (GX Configurator-CT)". (Refer to Section 9.3 for details of the error
codes.)