(Power On indicator)
Indicates that the power is on.
Louver display
Indicates the action of the swing louver.
Does not appear if the louver is stationary.
Room Temperature display
Shows the room temperature. The room
temperature display range is 8–39°C,
46-102°F. The display blinks if the tem-
perature is less than 8°C, 46°F or 39°C,
102°F or more.
Wired Remote-Controller
Display Section
,GHQWL¿HVWKHFXUUHQWRSHUDWLRQ
Shows the operating mode, etc.
* Multi-language display is sup-
ported.
“Centrally Controlled” indicator
Indicates that operation of the
remote controller has been pro-
hibited by a master controller.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto
Off timer is set.
If the simple or Auto Off timer is set, shows the
time remaining.
“Sensor” indication
Displayed when the remote controller
sensor is used.
“Locking function” indicator
Indicates that remote controller but-
tons have been locked.
“Clean The Filter” indicator
Comes on when it is time to clean
WKH¿OWHU
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
$LUÀRZXSGRZQGLUHFWLRQLQGLFDWRU
The indicator
shows the direction
RIWKHDLUÀRZ
“One Hour Only” indicator
'LVSOD\HGLIWKHDLUÀRZLVVHWWR/RZDQG
downward during COOL or DRY mode.
(Operation varies according to model.)
The indicator goes off after one hour
ZKHQWKHDLUÀRZGLUHFWLRQDOVRFKDQJHV
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
Operation Section
Temperature set buttons
Down
Up
Set Time buttons
Timer On/Off button
(Set Day button)
Opening
the door
ON/OFF button
Fan Speed button
Filter
button
(<Enter> button)
Test Run button
Check button (Clear button)
$LUÀRZ8S'RZQEXWWRQ
Louver button
(
Operation button)
To return operation
number
Ventilation button
(
Operation button)
Note:
“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power failure.
Operation mode blinking display
When multiple indoor units are connected to a single outdoor unit and an operation mode is selected for one indoor unit that is different from the current
operation mode of another indoor unit, the operation mode display blinks. Select the same operation mode of the other indoor unit.
“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
When the same remote controller is used to operate multiple indoor units, this message is displayed if the main indoor unit is not equipped with the
selected function.
Room temperature display
The indoor unit temperature sensors or the remote controller temperature sensor can be selected to measure the room temperature. The indoor unit
temperature sensors are the initial setting. When the indoor unit temperature sensors are selected to measure the room temperature, the room tem-
perature measured at the main indoor unit is displayed on the remote controller that operates multiple indoor units.
2. Parts Names
Built-in temperature sensor
To go to next operation number
Back
Ahead
For purposes of this explana-
tion, all parts of the display are
shown. During actual operation,
only the relevant items will be
displayed.
Timer Menu button
(Timer monitor/Timer set button)
Operation mode button
(Back button)
