UNDER VEHICLE
PRE-DELIVERY INSPECTION
1-15
REMOVE FRONT SPRING RESTRAINTS
CAUTION
It is very important that these restraints must be
removed during pre-delivery inspection. Failure
to do so could cause ride and handling com-
plaints.
With the vehicle correctly positioned on the
sub-frame contact points, and the suspension fully
extended, remove the rubber restraints from the front
springs.
15. STEERING LINKAGE AND SPLIT PINS
M6010600300023
1. Steering linkage retaining nuts and split pins
Check visually and by feel that the steering
linkage retaining nuts are correctly tightened and
the split pins are correctly installed.
2. Tie rods and relay rod
Check that the tie rods and relay rod of the
steering linkage are not bent and that the tie rod
end lock nuts are securely tightened.
3. Steering components
(1) Check that each of the steering components is
tightened.
(2) Check the tie rod end, nuts and split pins for
proper installation.
(3) Check the condition of bellows-type dust
seals.
4. Split pins
Check the front axle nuts and rear wheel spindle
nuts for split pins.
16. UNDER BODY
M6010600400020
Check under body and under body coating for dam-
age.
AC305605
Spring
restraints
AC305604
Summary of Contents for Pajero Sport 2013
Page 6: ...NOTES...
Page 16: ...BODY PRE DELIVERY INSPECTION 1 10...
