OPERATIONS INSIDE THE ENGINE COMPARTMENT
PERIODIC INSPECTION AND MAINTENANCE
2-35
WATER LEVEL SENSOR CHECK
1. Connect the circuit tester to the water level
sensor.
2. There should be continuity when the float is
raised, while there is no continuity when it is
lowered.
3. Replace the water level sensor if it is faulty.
<Petrol-powered vehicles>
1. Reduce pressurized fuel lines.
2. Remove the second seat assembly (LH), rear
scuff plate (LH) and turn up the floor carpet.
3. Remove the floor inspection lid.
4. Disconnect the fuel tank pump and gauge
assembly connector and fuel high-pressure hose.
5. Remove the fuel tank pump and gauge assembly
mounting nuts.
CAUTION
Pay attention not to damage float of the fuel tank
gauge unit when removing the fuel tank pump
and gauge assembly from the fuel tank.
6. Replace the fuel tank pump and gauge gasket
with a new one.
1 2
AC502835
Float
AD
<Steel filter case>
ACB01915AC
Float
<Plastic filter case>
AC800981
AB
Floor inspection lid
AC806807
Fuel high-
pressure hose
Fuel tank
hose (vapour)
AB
Fuel tank
pump and
gauge
assembly
connector
AC806808
AB
Fuel tank
pump
and gauge
assembly
AC807646
AB
Fuel tank
pump module
Float
Summary of Contents for Pajero Sport 2013
Page 6: ...NOTES...
Page 16: ...BODY PRE DELIVERY INSPECTION 1 10...