7
To set
1
Switch the power on.
2
Select operating mode.
Select desired operating mode.
3
Change the louvre swing direction.
Select the desired setting.
4
Set the operating time.
¡
When pressed once the figure [
] and [OFF] appear.
¡
Each subsequent press changes the display in order from 1 to 9
hours. (Hold the button to run automatically through the numbers.)
➝
The OFF timer is set.
The following is an example of a display indicating AUTO
dehumidifying (set to 60%), swing set to WIDE and the OFF timer set
for 2 hours.
¡
The time remaining until the unit switches itself off is indicated in
increments of one hour with a flashing numeral.
¡
When the set time is reached, the unit switches itself off and the
louvre closes automatically.
To set
1
Switch the power off.
2
Set the time you wish the unit to turn on.
¡
Press once. The Power lamp, Mode indicator, and a [
] on the
digital display flash. The [ON] indicator lights.
¡
Each subsequent press changes the display in order from 1 to 9
hours. (Hold the button to run automatically through the numbers.)
3
Select operating mode.
Select desired operating mode.
4
Change the louvre swing direction.
Select the desired setting.
5
Confirm the operating start time.
¡
Power lamp and Time display light.
➝
The ON timer is set.
The unit informs you if you forget to press the Power button by making the
Time display and Mode indicator blink and sounding an alarm for 1 minute.
The following is an example of a display indicating AUTO dehumidifying
(set to 60%), swing set to WIDE and the ON timer set for 5 hours.
¡
The time remaining until the unit switches itself on is indicated in
increments of one hour with a flashing numeral.
¡
When the set time is reached, the unit switches itself on.
To cancel
Press the Power button. (Power off)
¡
The timer is cancelled.
The ON timer function is not operable using a commercially-available
timer plug outlet.
<<ON timer operation>>
The ON timer can be set for 1 to 9 hours.
Set the timer when the power is switched off.
No Display
(operation
is off)
Press
Press
Information
<<OFF timer operation>>
The OFF timer can be set for 1 to 9 hours.
Set the timer when the power is switched on.
No Display
(operation
is off)
To cancel
<When you want to turn the unit off>
Press the Power button. (Power off)
¡
The OFF Timer is cancelled.
<When you want to disable the Timer OFF mode, and
continue operation>
Keep pressed until the remaining time display disappears. The unit returns
to Low mode.
¡
The OFF Timer is cancelled.
∞
The OFF timer and ON timer cannot be set at the same time.
∞
Do not use the timer OFF mode in conjunction with Laundry or Midew
guard.
∞
Empty the water tank before operating. The unit stops and the Tank
full lamp lights if the tank becomes full during operation.
Press
Press
Press
Press
Information
E16SX
Summary of Contents for MJ-E16S-S1
