11
3
Clean air filter
Hose with lukewarm water when
excessively soiled. Dry well.
4
Set the air-purifying filter
Set the air-purifying filter into the air
filter with the honeycomb side up.
5
Attach the air filter and front panel
1
Remove front panel and air filter
2
Remove the air-purifying filter
The air purifying filter cannot be washed
in water.
Replace the air purifying filter when it
becomes dirty.
Removing W
ater fr
om the T
ank
The unit automatically shuts down and lights the Tank
full lamp when the tank (approximately 4L) is full.
Empty the tank.
1
Remove the water tank.
2
Remove the tank lid, and empty.
3
Reattach the tank lid and replace
the water tank.
Confirm that the lid is
securely attached to the
water tank, and push the
tank in. Close the front
door.
¡
If the lid is not properly closed, you may have
problems removing the tank.
¡
If the tank is not installed correctly, the tank
full light will come on, and the unit will not
operate.
Do not remove or dismantle the floating element
in the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
Replacing the Air Purifying Filter
The air purifying filter is disposable.
The air purifying filter is disposable.
Make sure to replace the filter when it becomes dirty.
(The filter cannot be washed or reused.)
Replacing air purifying filter
For maintenance procedures see p10.
1
Remove front panel and air filter
2
Replace air-purifying filter
3
Attach air filter and front panel
Note
Maintenance
Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated
dusters, gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may
result in leakage.
Cleaning
Once ever
y two weeks
W
ater tank
Wipe with a soft cloth.
Main unit
Wipe with a
soft cloth.
The unit draws in dust present
in the air, and this may cause
the tank
to gradually become
dirty
. If the dirt does not come
off easily, wash with cold or
warm water, then wipe with a
soft, dry cloth.
Floating
element
Do not remove
or dismantle.
5.
Dail
y c
hec
ks and maintenance
Air filter
Debris clogging the air filter reduces the effectiveness of the dehumidifier.
Clean once every 2 weeks.
Air filter
Air purifying filter for replacement
∞
Type: MJPR-SXFT
∞
Type code: 5C5 813
For these items contact your nearest Mitsubishi
Electric dealer.
Front
panel
1
Remove holding
the bottom
2
Remove
holding the
tabs
Air filter
Air purifying filter
Run a vacuum cleaner
lightly over the air filter
surface to remove the
dirt.
If the metal fin inside the main unit is slightly
bent, the unit’s performance is not affected.
Honeycomb
side
1
Attach holding the
tabs.
2
Hook the top edge to
the top part of the unit
and push the bottom in.
Open the front door
Grasp handle and slide out
Float
Do not remove
<Hold the tank this way.>
water tank
Pour the
water out as
shown.
Parts sold separately
When to replace it
Replace the filter when it becomes dirty
(brownish) with cigarette smoke, dust, etc.
Generally, one filter should last about 6 months.
(This will depend on usage conditions.)
Summary of Contents for MJ-E16S-S1
