Mitsubishi MJ-E16S-S1, Service Manual

Page: 45 / 48

is displayed. (Letters are displayed alternately)
¡
Power plug is not firmly inserted in the socket.
is displayed. (Letters are displayed alternately)
¡
Air outlet is blocked.
¡
Air filter is clogged.
is displayed. (Letters are displayed alternately)
¡
Malfunction.
All operation lamps lit (Low, Laundry, Low Temp, Air purifier)
¡
Check to see if the power plug is correctly inserted into the wall socket.
All timer lamps lit
¡
Check to see if the air outlet is blocked.
¡
Check to see if the air filter is clogged.
E16S
45
Operation noise reverberates.
¡
Sometimes occurs when using the unit in a room with flooring or in a narrow room.
Rumbling or other strange sounds are made by the unit when starting,
stopping operation, or changing modes.
¡
The refrigerant may be producing strange noises before its circulation stabilizes.
A “buzz” can be heard sometimes.
Compressor does not work.
¡
To protect the compressor, it will not operate for 3 minutes when the unit is turned on
immediately after being turned off or plugged in.
¡
When the room humidity level is lower than the set level in EASY DEHUMIDIFYING mode, the
compressor does not operate.
Fluid or white deposit left after evaporation can be found in the water tank.
¡
This is the remainder of water which accumulated in the tank during the unit test run at the
factory, and is not a malfunction.
Black burn mark on the tank lid or inside the water tank.
¡
The mark is by the dust in the air. Clean according to the instructions set in the “maintenance”
of page 20 in the instruction manual.
The humidity level indicated by the dehumidifier is different from that indicated by
another hygrometer.
¡
The humidity can vary between different places in the same room. Please use the humidity
display as a rough guide.
E16S
E16SX
E16SX
E16SX