6 - 15
6 - 15
6. HOW TO COMMUNICATE WITH ID TAGS
6.3.2 Auto
With the auto communication specification, communication is performed while the ID
tag is being moved.
1. When the ID instruction execution request (Y14, Y1C) is turned ON, ID tag detection
is started.
2. When an ID tag enters within the antenna communication area, communication with
the ID tag is started.
3. After communication with the ID tag ends, ID instruction complete (X4, XC) turns
ON.
4. When the ID instruction execution request (Y14, Y1C) is turned OFF, ID instruction
complete (X4, XC) turns OFF and the module changes to a standby state.
5. With the auto communication specification, communication cannot be performed
normally and error detection (X5, XD) turns ON when multiple ID tags are within the
antenna communication area at once. Thus, make sure there is only one ID tag
within the antenna communication area.
Communication
ID tag within communication area
Waiting for ID
tag
Communication
No ID tag
ID tag within communication area
ID instruction complete (X4, XC)
Communication with ID tag
(Movement of ID tag A)
ID instruction execution request (Y14, Y1C)
ID-BUSY(X3, XB)
(Movement of ID tag B)
Error detection (X5, XD)
Result reception (Y16, Y1E)
ID communication complete (X2, XA)
Communication is started by
the ID tag entering within the
communication area.
Communication area
ID tag A
ID tag B
