1 - 2
1 - 2
1. OVERVIEW
1.2 RFID Interface Module Features
The following describes the features of the RFID interface module.
(1) The RFID interface module uses a rich group of Mitsubishi Electric MELSEC-Q series
products, and is capable of controlling Omron RFID system V680 series products.
(2) The two-channel RFID interface module enables independent antenna operation per
channel.
(Setup)
(Finishing and inspection)
CH1
CH2
(3) The two-channel RFID interface module allows you to the module allows you to copy
data between ID tags using the Copy Data command.
Data
Copy
(4) The one-channel RFID interface module enables use of an amplifier built-in type
antenna.
(5) The module is provided with various test functions as standard.
The communication test function allows you to check whether or not
communication with an ID tag is possible without operating the sequence program.
The distance level measurement function measures the distance between the
antenna and ID tag with respect to the communication area, dividing the margin
into six stages.
The communication success rate measurement function executes
communication with a static ID tag 100 times, and measures the repeated
communication success rate.
The speed level measurement function measures the number of times
communication can be performed continuously according to the speed of an ID
tag that moves within the antenna communication area.
The noise level measurement function measures the noise level in the area
surrounding the antenna installation location.
(6) The module allows you to simply develop programs by downloading an FB (function
block) library that can be used with Mitsubishi Electric MELSOFT GX Works 2 from
the Mitsubishi Electric Corporation FA device information site MELFANSweb.
1
