Mitsubishi MELSEC-F FX-10DM-E, User Manual

Page: 29 / 92

FX-10DM-E DISPLAY MODULE Specifications 2
2-3
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
2.4 Performance specifications
For the specifications on displayed characters for comments and messages, refer to Paragraph 6.3.2.
2.5 Connectable PLC
The 10DM can be connected to either of the following FX Series PLC units.
*1 Because the 10DM receives the power of 5V DC from the PLC, attention should be paid
depending on the PLC configuration. For the details, refer to the manual of the connected PLC.
Table 2.3:
Display device and display colors
STN character type liquid crystal, character color: black,
background color: yellowish green
Resolution and effective display size 80
×
16 dots, 11.6
×
56.2 mm
Displayed (half-width) characters 16 half-width characters
×
2 lines
Visible angle range 30 degrees in left, right, up and down
Operation switches 5 mechanical keys
Built-in memory EEPROM memory
Life time
(average)
Display element
Approximately 50,000 hours or more at room temperature
(= 25
°
C) and room humidity (guarantee period: 1 year)
Backlight
Yellowish green, LED backlight type, free from maintenance
(guarantee period: 1 year)
External interface RS-422 1ch
Table 2.4:
FX Series PLC
FX
1
, FX, FX
2C
FX
0
, FX
0S
, FX
1S
, FX
0N
, FX
1N*1
, FX
2N*1
, FX
2NC*1