Mitsubishi MELSEC-F FX-10DM-E, User Manual

Page: 75 / 92

FX-10DM-E DISPLAY MODULE Display Function 6
6-21
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
6.4 "DEVICE MONITOR"
"2: DEVICE MONITOR" allows to monitor word devices and change their data using easy
operating procedures.
Display example
When specifying the device No. or data, press the [
▲
] key to increase it, and press the [
▼
] key
to decrease it.
When the [
▲
] or [
▼
] key is pressed and held, the device No. or data increases or decreases
quickly. Use the [FNC] key to specify the digit.
Table 6.9:
Display Description on functions
2: DEVICE MONITOR
Allows to select word devices (D, T and C) of the PLC, and display and change
the current value (D, T and C) and the set value (T and C).
Up to 2 data registers (D), 1 timer (T) or 1 counter (C) can be displayed at a time.
Data registers (D) and a timer (T) or counter (C) cannot be displayed at the
same time.