Mitsubishi MELSEC-F FX-10DM-E, User Manual

Page: 81 / 92

FX-10DM-E DISPLAY MODULE Display Function 6
6-27
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
6.5.4 Change of sign (+ or -) of data
This paragraph describes the procedure to change the sign of the data to minus (-) or plus (+).
Target devices: D, DD and C (C200 to C255)
You can set the sign by increasing or
decreasing the numeric value by pressing
the [
▲
] or [
▼
] key. However, it takes consid-
erable time to set a large numeric value.
[
▲
] Current value [
▼
]
←
-2
←
-1
←
0
→
1
→
2
→
[Cautions on key operation]
When you change the sign by pressing the
[
▲
] or [
▼
] key then press the [
▲
] or [
▼
] key,
the 10DM performs the following operation.
For example, when you have set the sign to
minus (-) by mistake and would like to
return the sign to plus (+):
When you have set the sign to minus by
pressing the [
▼
] key then press the [
▲
] key,
the cursor "
❚
" moves to the lowest digit.
Press the [FNC] key to move the cursor to
the sign digit, then press the [
▲
] key.
The 10DM is so designed that the cursor
moves to the lowest digit if you have
changed the sign by pressing the [
▲
] or [
▼
]
key then press another key.