Mitsubishi FX2N-64CL-M, User Manual

Page: 24 / 94

FX2N-64CL-M CC-Link/LT Master Block Specifications 2
2-6
2.6 Compliance with EC directive
This note does not guarantee that an entire mechanical module produced in accordance with
the contents of this note will comply with the following standards.
Compliance to EMC directive of the entire mechanical module should be checked by the user /
manufacturer.
• Requirement for Compliance with EMC directive
The following products have shown compliance through direct testing (of the identified
standards below) and design analysis (through the creation of a technical construction file)
to the European Directive for Electromagnetic Compatibility (89/336/EEC) when used as
directed by the appropriate documentation.
Type : Programmable Controller (Open Type Equipment)
Models : Products manufactured:
from February 1st, 2003 to April 30th, 2006 are compliant with
EN61000-6-4 and EN61131-2:1994+A11:1996+A12:2000
after May 1st, 2006 are compliant with EN61131-2:2003
Notes For compliance to EMC regulation.:
It is necessary to install the FX
2N
-64CL-M in a shielded metal control panel.
For more details please contact the local Mitsubishi Electric sales site.
Standard Remark
EN61000-6-4: 2001 Electromagnetic compatibility
-Generic emission standard
Industrial environment
Compliance with all relevant aspects
of the standard.
•
Radiated Emissions
• Mains Terminal Voltage Emissions
EN61131-2:1994 Programmable controllers
/A11: 1996 -Equipment requirements and tests
/A12: 2000
Compliance with all relevant aspects
of the standard.
•
RF Immunity
• Fast transients
• ESD
• Damped oscillatory wave
EN61131-2:2003 Programmable controllers
- Equipment requirements and tests Compliance with all relevant aspects
of the standard.
•
Radiated Emissions
• Mains Terminal Voltage Emissions
• RF immunity
• Fast Transients
• ESD
• Surge
• Voltage drops and interruptions
• Conducted
• Power magnetic fields