Mitsubishi FX2N-64CL-M, User Manual

Page: 17 / 94

FX2N-64CL-M CC-Link/LT Master Block Outline 1
1-3
St
a
tus
indic
a
to
r LE
Ds
ERR.
<ONLINE mode>
Lit
:Communication speed setting error occurred
EEPROM read error (sum mismatch) occurred
Flickering :Power supplied for communication is abnormal
DIP switch for operation setting was changed during
operation
Extinguished :FX
2N
-64CL-M is operating normally
<CONFIG mode>
Lit
:Communication speed setting error occurred
EEPROM write error occurred
Flickering :Power supplied for communication is abnormal
DIP switch for operation setting was changed during
operation
Extinguished :FX
2N
-64CL-M is operating normally
<TEST mode>
Lit
:Communication speed setting error occurred
Flickering :Power supplied for communication is abnormal
DIP switch for operation setting was changed during
operation
Extinguished :FX
2N
-64CL-M is operating normally
L RUN
<ONLINE mode/CONFIG mode>
Lit
:Data link is executed
Extinguished :Data link is stopped
<TEST mode>
Lit
:Self-loop back Test was finished normally
Extinguished :Self-loop back Test was finished abnormally
(Extinguished while the self-loop back Test is executed)
L ERR.
<ONLINE mode>
Lit
:Use station number discrepancy
Outside-control-range station error occurred
Flickering :Stations are abnormal
Extinguished :Data link is executed normally
<CONFIG mode>
Lit
:Use station number discrepancy
(when BFM#32(20h) to #95(5Fh) is edited, the station
numbers are checked.)
(When the power is turned ON while a remote station is
attached and the following setting is made: number of
connected stations varies by editing BFM#32(20h) to
#95(5Fh))
Flickering :All stations are abnormal
(when BFM#32(20h) to #95(5Fh) is edited, the station
numbers are checked.)
(When power is turned ON while no remote station is
attached and then BFM#32(20h) to #95(5Fh) is edited)
Extinguished :Data link is executed normally
<TEST mode>
Lit
:Self-loop back Test was finished abnormally
Extinguished :Self-loop back Test was finished normally
(Extinguished while the self-loop back Test is executed)
SD
<ONLINE mode/CONFIG mode/TEST mode>
Lit: Data is currently being sent
RD
<ONLINE mode/CONFIG mode/TEST mode>
Lit: Data is currently being received
Interface
Connector for CC-Link/LT interface (24G/DB/DA/+24 V)
Name Description