Mitsubishi FX2N-64CL-M, User Manual

Page: 19 / 94

Specifications 2
2-1
2. Specifications
This section explains the specifications of the FX
2N
-64CL-M.
DESIGN PRECAUTIONS
When a remote module fails, outputs may randomly set ON or OFF, therefore, build an
external monitoring circuit that will monitor any input signals that could cause a serious
accident.
DESIGN PRECAUTIONS
• Do not bind control and connection cables to CC-Link/LT together with power cables.
Keep control and connection cables to CC-Link/LT away from major circuits and power
cables by 100 mm (3.93") or more.
It may cause a malfunction due to noise interference.
• Use the FX
2N
-64CL-M in such status that any force is not applied on connectors for CC-
Link/LT interface and connection cables to CC-Link/LT.
If any force is applied, wire breakage and failure may be caused.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not touch the terminals while the power is ON. It may cause an electric shock or
malfunction.
• Shut down all phases of the power supply outside the master block before starting any
cleaning procedures.
If the power is not disconnected from all sources, the FX
2N
-64CL-M may fail or
malfunction.
STARTING AND MAINTENANCE PRECAUTIONS
• Do not disassemble or modify the FX
2N
-64CL-M.
Doing so may cause failure, malfunction, injury, or fire.
• The case of the FX
2N
-64CL-M is made of resin.
Do not drop or apply strong impacts to the FX
2N
-64CL-M.
DISPOSAL PRECAUTIONS
• Treat the FX
2N
-64CL-M as industrial waste when disposing of the product.
FX2N-64CL-M CC-Link/LT Master Block