Mitsubishi MOTORS Mirage 2012, Owner'S Manual

Page: 90 / 250

NOTE
l
The speed-sensitive-operation function of the
windscreen wipers can be deactivated.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point.
Misting function
Move the lever in the direction of the arrow and re-
lease, to operate the wipers once.
Use this function when you are driving in mist or
drizzle.
Vehicles with rain sensor
E00517000402
MIST- Misting function
The wipers will operate once.
OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically operate
depending on the degree of wetness
on the windscreen.
LO- Slow
HI- Fast
Rain sensor
Can only be used when the ignition switch or the
operation mode is in ON.
If the lever is put in the “AUTO” position, the rain
sensor (A) will detect the extent of rain (or snow,
other moisture, dust, etc.) and the wipers will oper-
ate automatically.
Keep the lever in the “OFF” position if the wind-
screen is dirty and the weather is dry.
Wiper operation under these conditions can scratch
the windscreen and damage the wipers.
CAUTION
l With the ignition switch or the operation
mode in ON and lever in the “AUTO” po-
sition, the wipers may automatically oper-
ate in the situations described below.
If your hands get trapped, you could suf-
fer injuries or the wipers could malfunc-
tion. Be sure to turn the ignition switch to
the “LOCK” position or put the opera-
tion mode in OFF, or move lever to the
“OFF” position to deactivate the rain sen-
sor.
• When cleaning the outside surface of
the windscreen, if you touch on top of
the rain sensor.
• When cleaning the outside surface of
the windscreen, if you wipe with a
cloth on top of the rain sensor.
• When using an automatic car wash.
• A physical shock is applied to the wind-
screen.
Instruments and controls
3-20
OA0X13E4
3