Mitsubishi MOTORS Mirage 2012, Owner'S Manual

Page: 112 / 250

CAUTION
• When the preset temperature of the
air conditioning is changed significant-
ly.
• When the air conditioner is operated
in AUTO mode where the tempera-
ture control is set to the max. hot or
the max. cool
• When the air conditioner is ON, the
passenger compartment temperature
rises and the air conditioning compres-
sor operates to lower the temperature
• Demister switch is pressed
Refer to “For quick demisting” on
page 5-11
• Electric power consumption is high,
such as when the rear window demis-
ter or other electrical components are
operating or the blower speed is set to
a high setting.
• Push the accelerator pedal
• Battery voltage or battery perform-
ance is low
• Operate the steering wheel
• After the engine stop, 3 minute elapse
(CVT)
• Move the selector lever to the “R” (RE-
VERSE) position (CVT)
• Move the selector lever from the “N”
(NEUTRAL) to “D” (DRIVE) position
(CVT)
NOTE
l In the following cases, the engine will not re-
start automatically.
• While the engine is stopped automatical-
ly, the “Auto Stop & Go (AS&G) OFF”
switch is pressed to deactivate the “Auto
Stop & Go (AS&G) OFF” system.
• The driver has left the driver’s seat after
unfastening the seat belt and opening the
door.
l
When the engine restarts automatically, the
audio volume may temporarily decrease.
This does not indicate a malfunction.
l While the engine is stopped automatically,
the air volume change of the air conditioner
may temporarily be experienced. This does
not indicate a malfunction.
l While the engine is stopped automatically, if
the selector lever is moved to the “P”
(PARK) position quickly with the brake ped-
al is kept depressed, the engine is kept stop-
ped with blinking the AS&G indicator even
if you release the brake pedal.
If you want to restart the engine, depress the
brake pedal again.
To deactivate
E00627700100
The Auto Stop & Go (AS&G) system is automati-
cally activated when the ignition switch is turned to
the “ON” position or the operation mode put in
ON. You can deactivate the system by pressing the
“Auto Stop & Go (AS&G) OFF” switch.
When the Auto Stop & Go (AS&G) system is deac-
tivated, the
indicator will be turned on.
To reactivate the Auto Stop & Go (AS&G) system,
press the “Auto Stop & Go (AS&G) OFF” switch;
the indicator will turn off.
Indication lamp
NOTE
l
This indicator will also turn on for a few sec-
onds when the ignition switch is turned to
the “ON” position or the operation mode put
in ON.
If the indication lamp blinks while
driving
E00627800084
If the indication lamp blinks, the Auto Stop &
Go (AS&G) system is malfunctioning and will not
operate.
We recommend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
Starting and driving
4-18
OA0X13E4
4