Mitsubishi MOTORS Mirage 2012, Owner'S Manual

Page: 216 / 250

No.
Sym-
bol
Electrical system
Ca-
pacity
F13 Ignition coil 7.5 A
F14 Engine control 7.5 A
F15 Alternator 7.5 A
F16 Hazard warning flasher 10 A
F17 Automatic transmission 15 A
F18 Air conditioning 10 A
F19 ETV 15 A
F20 Battery current sensor 7.5 A
F21 CVT oil/pump 15 A
F22 Fuel pump 15 A
F23 Engine 20 A
F24 Automatic transmission 7.5 A
#1 — Spare fuse 20 A
#2 — Spare fuse 30 A
*
: Fusible link
l Some fuses may not be installed on your ve-
hicle, depending on the vehicle model or spec-
ifications.
l The table above shows the main equipment
corresponding to each fuse.
Type B
No. Symbol Electrical system Capacity
SBF1 PTC heater
40 A
*
SBF2 PTC heater
40 A
*
SBF3 PTC heater
40 A
*
*
: Fusible link
l Some fuses may not be installed on your ve-
hicle, depending on the vehicle model or spec-
ifications.
l The table above shows the main equipment
corresponding to each fuse.
The fuse box does not contain spare 7.5 A, 10 A or
15 A fuses. If one of these fuses burns out, substi-
tute with the following fuse.
7.5 A: Outside rear-view mirrors
10 A: Option
15 A: Cigarette lighter
When using a substitute fuse, replace with a fuse of
the correct capacity as soon as possible.
Identification of fuse
E01008100366
Capacity Colour
7.5 A Brown
10 A Red
15 A Blue
20 A Yellow
30 A
Green (fuse type) / Pink (fusible
link type)
40 A Green (fusible link type)
Fuse replacement
E01007800887
1. Before replacing a fuse, always turn off the
electrical circuit concerned and place the ig-
nition switch in the “LOCK” position or put
the operation mode in OFF.
2. Remove the fuse puller (A) from the inside
of the fuse box in the engine compartment.
3. Referring to the fuse load capacity table,
check the fuse pertaining to the problem.
Maintenance
8-18
OA0X13E4
8