Mitsubishi MOTORS Mirage 2012, Owner'S Manual

Page: 51 / 250

If the ignition switch is turned to the “ON” position
or the operation mode is put in ON while a seat
belt is not fastened, the warning lamp comes on
and the tone sounds for about 6 seconds to remind
the driver and the front passenger to fasten the seat
belt.
If the vehicle is driven with the seat belt still unfas-
tened, the warning lamp will blink and the tone
will sound intermittently until the seat belt is fas-
tened.
NOTE
l If the seat belt subsequently remains unfas-
tened, the warning lamp and the tone will is-
sue further warnings each time the vehicle
starts moving from a stop.
l For the front passenger seat, the warning func-
tion works only while a person is sitting on
the seat.
l When luggage is placed on the front passen-
ger seat, a sensor in the seat cushion may, de-
pending on the weight and position of the lug-
gage, cause the warning tone to sound and
the warning lamp to come on.
Adjustable seat belt anchor (front
seats)*
E00405000563
The seat belt anchor height can be adjusted.
To move the anchor, pull the lock knob (A) and
slide the anchor to the desired position. Release the
lock knob to lock the anchor into position.
WARNING
l When adjusting the seat belt anchor, set
it at a position that is sufficiently high so
that the belt will make full contact with
your shoulder but will not touch your neck.
Rear seat belt storage
E00405400059
When folded the rear seatbacks forward, store the
seat belts as shown in the illustration.
Seat and seat belts
2-07
OA0X13E4
2