Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual

Page: 270 / 602

The display on the information screen of the
multi-information display will switch to show
information on the ACC.
When the ACC is activated, it is placed in the
standby state at which any control function is
not started.
NOTE
l
Even if the ACC is in the activated state
when the ignition switch is turned to the
“LOCK” position or the operation mode is
set to OFF, the system does not automatical-
ly become activated when the ignition
switch or operation mode is set to “ON” next
time.
To activate ACC control
With the ACC turned on (in the standby
state), push down the “SET -” switch while
driving.
When your desired speed is reached, release
the “SET -” switch; then this speed is set and
the ACC initiates the speed control to the set
speed.
The set speed is indicated on the information
screen of the multi-information display.
The ACC can be selected between approxi-
mately 30 to 180 km/h (20 to 110 mph).
You can set and initiate the speed control
when driving at approximately 0 to 30 km/h
(0 to 20 mph) while a vehicle in front is be-
ing detected. In this case, the target speed is
set to 30 km/h (20 mph).
Setting to any speed outside this range does
not cause the ACC to start the control.
When the ACC is initialized, the “SET” indi-
cator lights up on the screen. At the same
time, the display showing the following dis-
tance setting and the running-ahead vehicle
symbol (only when the ACC is detecting a
vehicle in front) is switched to the in-control
mode display.
While the ACC system is turned on (in the
standby state), if you push down the “SET -”
switch when a vehicle in front is detected
while your vehicle is stopped and you are de-
pressing the brake pedal, “HOLD” will ap-
pear and the vehicle speed will be set to
30 km/h (20 mph).
NOTE
l The ACC cannot start the control when any
of the following conditions is present. You
are alerted to this state by a sounding buzzer.
• When the vehicle speed is more than
180 km/h (110 mph).
Adaptive Cruise Control System (ACC)*
6-84
OGKE20E1
Starting and driving
6