Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual

Page: 282 / 602

CAUTION
• When passing through a plastic curtain
etc.
• When the FCM detects a long object car-
ried on your vehicle, such as skis or a roof
carrier.
• When driving through fog, steam, smoke
or dust.
• When the windscreen of the sensor por-
tion is covered with dirt, water droplets,
snow and ice, etc.
l Turn off the system beforehand when the ve-
hicle is placed in any of the following situa-
tions as the system can operate unexpected-
ly.
• When using an automatic car wash.
• When your vehicle’s wheels are driven by
the engine on a lift.
• When your vehicle is towed or your vehi-
cle tows another vehicle.
• When your vehicle is carried on a truck.
• When enjoying sports driving on a circuit.
• When your vehicle is on a chassis dyna-
mometer or free rollers.
• When the tyre pressure is not correct.
• When installing the spare tyre for emer-
gency.
• When the snow traction device (tyre
chains) are attached.
• If the windscreen on or surrounding the
sensor is cracked or scratched.
NOTE
l
A sound will be heard during the activation
of automatic braking, this is a function of the
brake control and is not abnormal.
FCM and Ultrasonic misaccel-
eration Mitigation System
(UMS)* ON/OFF switch
This switch is used to turn on and off the
FCM and Ultrasonic misacceleration Mitiga-
tion System (UMS) and also to select your
desired collision alarm timing.
When the switch is held pressed, the
ON/OFF state of the FCM and UMS changes
from ON to OFF and vice versa. If you give
the switch a short press with the FCM in the
ON state, you can change the collision alarm
timing.
NOTE
l
When the FCM and Ultrasonic misaccelera-
tion Mitigation System (UMS)* ON/OFF
switch is held pressed to change the
ON/OFF state of the FCM, the ON/OFF
state of the UMS is also changed at the same
time.
To turn on/off the system
You can switch the system from OFF to ON
or ON to OFF if you hold the FCM and Ul-
trasonic misacceleration Mitigation System
(UMS)* ON/OFF switch pressed when the
ignition switch is turned to the “ON” position
or the operation mode is put in ON.
Once the system is turned on, the information
screen of the multi-information display
shows the collision alarm timing currently se-
lected, and the indicator on the instrument
cluster goes out.
When you turn off the system, the following
message appears on the information screen of
the multi-information display and the indi-
cator on the instrument cluster.
Forward Collision Mitigation system (FCM)*
6-96
OGKE20E1
Starting and driving
6