manualshive.com logo in svg

Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual, Page: 366 / 602

Share
Download
Mitsubishi MOTORS Eclipse Cross 2019 Owner'S Manual Download Page 366

Repeat playback of the track currently being
played.

NOTE

l

Pressing again will cancel.

l

Selecting  a  track,  ejecting,  fast  forwarding,
or rewinding will cancel.

Random Playback (RDM)

Press the 2RDM key.
Play the tracks on the disc in a random order.

NOTE

l

Pressing again will cancel.

l

Ejecting will cancel this.

Scan Playback (SCAN)

Press the PTY/SCAN key.
Play the first 10 seconds of each of the tracks
on the whole disc in order.

NOTE

l

Press  this  button  again  during  playback  if
you  wish  to  hear  that  track,  and  that  track
will play normally.

Listening to MP3s

This explains how to listen to audio files on a
disc.

CAUTION

l

CD-ROM  and  CD-R/RW  media  can  only
play back MP3 format audio files.

To Listen to MP3s

Insert the disc.
Insert a disc to automatically start playback.
→ “Insert/Eject Discs” on page 7-31
If  a  disc  is  already  within  the  product,  press
the  MEDIA  key  to  switch  to  CD  as  the
source.

NOTE

l

Depending on the file structure, it may take
some time to read the contents of the disc.

Select the Track (File)

Press  the 

  key  or 

  key  to  select  the

track.
This enables selection of the next or previous
track.

Fast Forward or Rewind

Hold down the 3

 key or the 4

 key.

Fast forward/rewind is possible.

Switching Playback Mode

Repeat playback, random playback, and scan
playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.
Repeat playback of the track currently being
played.

NOTE

l

Pressing again will cancel.

l

Selecting a file, ejecting, fast forwarding, or
rewinding will cancel.

Folder Repeat Playback

Hold down the 1RPT key.
Repeat playback of the tracks within the fold-
er currently being played.

NOTE

l

Pressing again will cancel.

l

Even  if  the  file  is  selected,  folder  repeat
playback will not be cancelled.

Listening to MP3s

7-38

OGKE20E1

For pleasant driving

7

Summary of Contents for Eclipse Cross 2019



























































































































































































































































































































































































































































































































































































































Reviews:

No comments