Mitsubishi MOTORS Eclipse Cross 2019, Owner'S Manual

Page: 202 / 602

NOTE
l
When the battery in the keyless operation
key has worn out, or the keyless operation
key is out of the vehicle, a warning display
will appear.
Warning display (when the engine switch is
pressed one time)
Warning display (when the engine switch is
pressed two times or more)
Operation mode of the engine
switch and its function
OFF
The indication lamp on the engine switch
turns off.
The operation mode cannot be put in OFF
when the selector lever is in any position oth-
er than the “P” (PARK) position (A/T or
CVT).
ACC
Electrical devices such as the audio and ac-
cessory socket can be operated.
The indication lamp on the engine switch il-
luminates orange.
ON
All vehicle’s electrical devices can be operat-
ed.
The indication lamp on the engine switch il-
luminates green. The indication lamp goes
off when the engine is running.
NOTE
l Your vehicle is equipped with an electronic
immobilizer.
To start the engine, the ID code transmitted
by the transponder inside the key must
match the code registered in the immobilizer
computer. Refer to “Electronic immobilizer
(Anti-theft starting system)” on page 3-03.
Changing the operation mode
If you press the engine switch without de-
pressing the brake pedal (A/T or CVT) or the
clutch pedal (M/T), you can change the oper-
ation mode in the order of OFF, ACC, ON,
OFF.
CAUTION
l When the engine is not running, put the op-
eration mode in OFF. Leaving the operation
mode in ON or ACC for a long time when
the engine is not running may cause the bat-
tery to be discharged, making it impossible
to start the engine, lock and unlock the steer-
ing wheel.
Engine switch*
6-16
OGKE20E1
Starting and driving
6