'21 • SRK-T-324
-
96
-
Unable to update firmware.
Firmware update is not available during operation or clean operation
(Fan operation indication).
Turn off the air conditioner before updating the firmware.
Depending on the wireless LAN connection environment, it may fail to
recognize the wireless LAN interface.
In this case, you may be able to operate by the following operations.
・
Tap the Refresh button.
・
I "OFF" the Wi-Fi function on my smartphone and "ON" it again.
・
Reset the wireless LAN interface.
If the above procedure does not work, check the wireless LAN connection
environment.
The timer was set using the calendar function, but the air conditioner was
already running before the operation command was issued.
Up to the set time on the selected day of the week
(Weekly Timer Settings),
the operation status from the previous day is inherited.
If the last setting of the previous day is the operation command,
will remain in operation until the stop command comes.
(If there is no command for 24 hours, it stops automatically.)
If you want to stop it, review the settings.
Timer cannot be set with a home remote control.
When the wireless LAN interface is connected, the timer setting is disabled
on your home remote control depending on your air conditioner.
Please use the timer function of the application to set the timer.
Electricity Bill Graph is not displayed.
Some models don't have the function depending on the connected air
conditioner. If the function is not installed, the electric charge is
displayed as 0.
Is the Electricity Bill Graph displayed for each air conditioner?
It is displayed for each air conditioner.
