'21 • SRK-T-324
-
28
-
2. Confirm that the router to be used is equipped with the
WPS function (simple setting function).
WPS: Use when you connect to the router only by operating buttons.
AP: Use when you connect to the router by entering and setting SSID
and KEY (password).
3. Connect the air conditioner to the network.
Please display the Air Conditioner
List screen according to the Smart
M-Air Operation Manual.
(1) Press the Power button for 2 seconds or more on the wireless LAN
interface. The power is switched from OFF to ON, and the Running
LED stays ON.
(2) Press the Set button for less than 2 seconds to enter WPS mode.
Confirm that the Running LED flashes (every second).
• Perform the following setting within 2 minutes. If 2 minutes has
passed, perform the procedure again from (1).
* The WPS and AP modes cannot be switched. Therefore, if you fail to
set the mode, wait for 2 minutes (5 minutes in AP mode) before
performing the setting again.
(3) Press the WPS button on the router*. The
buttons generally look like this
.
•
depending on the router. For details, refer to the
manual provided with the router.
* If an automatic connection function other than the
WPS function is used, operate the automatic connection button by
referring to the manual provided with the router.
WPS button
Wireless LAN router equipped with WPS function
(simple setting function)
The operation method of the WPS button differs
