'21 • SRK-T-324
-
13
-
EN-7
＜
Cautions for installation
＞
●
Do not mount the holder and main unit inside the indoor unit.
●
Fix the holder on a wall, pillar, etc. securely with attached screws. (Do
not mount it on a clay wall, etc.)
●
Install the connection cable securely by sliding the main unit from
above to prevent the cable from being trapped in the holder.
●
Install the main unit within the range where the connection cable can
reach the indoor unit.
(The length of the connection cable is about 1.3m.)
●
Never extend the connection cable because this product may fail to
operate normally if the cable is extended.
●
Remove the body from the holder and install it in a position where the body
label can be seen. (SSID and KEY (Password) may need to be checked.)
＜
When installing the holder and main unit inside an
indoor unit in which they can be included
＞
●
Do not install them inside an indoor unit, except when a unit can
include them.
Accessories supplied with this product
Check the accessories supplied with this
product.
Symbol
Part name
Quantity
A
Holder
1
B
Holder mounting screw
2
C
Main unit
1
D
Installation manual (this
document)
1
Holes for mounting the unit on a wall
