Mitsubishi Heavy Industries SC-SL4-AE2 User Manual Download Page 28

Page: 28 / 98

– 27 –

<For air conditioner group (

page 47)>

[CHANGE GROUPS screen]

(Individual lock/unlock settings valid in
FUNCTION SETTING)

This function can be applied to the indoor
units, which are the model KXE4 or later,
and to the wired remote controller, which
is the model RC-E1 or later.

Press the button for the item to set or change.

• RUN/STOP/HOME LEAVE ON/HOME LEAVE OFF

Press the RUN, STOP,

button.

– When the RUN button is selected, the operation starts, and when the STOP button is

selected, the operation stops.

– When the

button is selected, Home leave operation starts.

– When the

button is selected, Home leave operation stops.

• MODE

Select Auto, Cool, Dry, Fan or Heat by pressing the button.

– Auto Mode can be valid in the FUNCTION SETTING of MAINTENANCE MENU.

page 84

This function can be applied to the indoor units, which are the cooling/heating free
multi KXR, single split PAC.

• SET TEMP.

Press

page 64 (TEMPERATURE RANGE SETTING)

To change only the set temperature without selecting the operation mode, select 18 -
30°C.

• FAN

Select (Powerful), (High), (Medium), (Low), or (AUTO), and press the
button.

– When using automatic mode, valid the AUTO FAN on the FUNCTION SETTING of

MAINTENANCE MENU.

– When using powerful mode, select 4-speed for FAN TYPE on the GROUP

DEFINITION DETAILS screen.

(Powerful mode)

Operates with the maximum fan speed.
It is suitable for heating or cooling the entire room thoroughly.

Summary of Contents for SC-SL4-AE2



































































































Search results

Summary of Contents for SC-SL4-AE2

Reviews:

Related manuals for SC-SL4-AE2

Brands by name

Popular brands

Mitsubishi Heavy Industries SC-SL4-AE2, User Manual

Search results

Summary of Contents for SC-SL4-AE2

Reviews:

Related manuals for SC-SL4-AE2

Brands by name

Popular brands