– 4 –
CAUTION
Do not wash the central control with water or liquid.
It could cause electric shocks,
fi
re or break-down.
Do not touch electric parts or operate buttons or screens with wet hands.
It could cause electric shocks,
fi
re or break-down.
Do not dispose the central control by yourself.
It could destruct the environment. Ask your dealer when it is necessary to dispose
the central control.
Depending on the place of installation, a leakage breaker may be necessary.
If a leakage breaker is not installed, electric shock may happen.
Consult your dealer.
Do not install the central control in any area where noise easily generates.
If it is installed near the computer, automatic door, elevator or equipment which
generates noise, it will cause to improper operation.
Do not install the central control in any area where it is very humid or the
vibration is large.
If it is installed in an area exposed to humidity, splashing water or high vibration, it
will cause malfunctions.
Avoid any place which is exposed to direct sunlight or is near a heat source.
If it is installed under direct sunlight or near a heat source, it will cause
malfunctions.
Note
The central control should not be installed where it is exposed to direct
sunlight or the ambient temperatures become higher than 40°C or lower than
0°C.
It could cause deformation, discoloration or break-down.
Do not use benzene, paint thinner, wipes etc. to clean the central control.
It could discolor or break-down the central control. Wipe it with a piece of cloth
which is squeezed tightly after wetting with diluted neutral detergent. Finish up the
cleaning by wiping with a piece of dry cloth.
Do not pull or twist the cable of the central control.
It could cause break-down.
A static electric discharge to the unit could cause a break-down.
Before performing operations, touch a grounded metal object and discharge any
static electricity.
Do not perform repetitive operations with signi
fi
cant force.
The touch panel will deteriorate, and screen response may worsen.
