– 15 –
Unit states
The unit status is shown by
fi
gures.
Error stop (One or more units have been stopped because of malfunction.)
Please contact your dealer.
(Gray)
Maintenance (The signal for prompt service and maintenance for one or more
units, not to show anomaly.)
Please contact your dealer.
Demand (The external signal is inputted to the demand terminal.)
The target unit’s set temperature shifts by 2 deg C or the target unit will switch
to fan mode and remote controller operations are prohibited. When the external
signal is cancelled, the setting will return.
page 48, 87
Emergency stop (The external signal is inputted to the emergency stop
terminal.)
All units stop and operations are prohibited. When the emergency stop signal is
cancelled, the remote controller lock/unlock setting will return but the units
remain stopped.
page 87
Note
Q-ton groups (
page 47) pause without stopping.
Accounting period time (This shows the accounting period time 2, 3 or 4. The
icon of accounting period time 1 is not shown. )
Energy saving (This shows the group that is the target for energy saving.)
Silent mode (This shows the group that is the target for silent mode.)
