Mitsubishi Heavy Industries SC-SL4-AE2 User Manual Download Page 19

Page: 19 / 98

– 18 –

Operation

Attention

A static electric discharge to the unit could cause a break-down.

Before performing operations, touch a grounded metal object and discharge any static
electricity.

Group Operation Settings (Monitor Group Status)

Note

When setting the temperature with SL4, disable the automatic setting of the remote control.

Press the ALL BLOCKS button on the MENU screen.

page 10

Press the block you wish to set or monitor.

The BLOCK LAYOUT screen is displayed.
The group name and status can be observed.

[BLOCK LAYOUT screen]

3, 5

Note

• Icons displayed have following meanings.

: Running (at least one unit is running)

: Paused (all units have paused for Q-ton group)

: Stopped (all units have stopped)

: Malfunction (at least one unit is not in good condition)

: Communication error (at least one unit can not communicate)

: Home leave running (at least one unit is running for home leave)

: Home leave stopped (all units have stopped and at least one unit’s status is home

leave)

• If the GROUP LIST button is pressed, the GROUP LIST is displayed.

page 24

• To display the units in a group, press the UNIT LIST button.

page 43

Summary of Contents for SC-SL4-AE2



































































































Search results

Summary of Contents for SC-SL4-AE2

Reviews:

Related manuals for SC-SL4-AE2

Brands by name

Popular brands

Mitsubishi Heavy Industries SC-SL4-AE2, User Manual

Search results

Summary of Contents for SC-SL4-AE2

Reviews:

Related manuals for SC-SL4-AE2

Brands by name

Popular brands