Mitsubishi Heavy Industries SC-BIKN-E, Technical Manual

Page: 7 / 20

DO NOT install the interface and wired remote control at the
following places.
٤
Places exposed to direct sunlight
٤
Places near heating devices
٤
High humidity places
٤
Surfaces where are enough hot or cold to generate condensation
٤
Places exposed to oil mist or steam directly
Ԙ
Mount the lower casing of the interface on a flat surface with wood
screws provided as standard accessory.
ԙ Mount the upper casing.
٤
Uneven surface
Ԙ
Mount it on a wall or a pillar
with 2 of wood screws
ԙ
Mount it to the electrical box
with 2 of M4 screws
(procured locally)
ԙ
Mount the
upper casing
Ԛ Mount the upper casing
Electrical box
(procured locally)
Connection cable
Wiring inlet
Wiring inlet
Installation check items
Mounting the interface with the mounting bracket
Mounting the interface directly on a wall
Recessing the interface in the wall
࡮ Install the interface within the range of the connection cable length
(approximately 1.3m) from the indoor unit.
࡮ Be sure not to extend the connection cable on site. If the connection
cable is extended, malfunction may occur.
࡮ Fix the interface on the wall, pillar or the like.
Cut out the punch-outs
for the connection cables
running into the casing
with cutter
Ԙ
Recess the electrical box (procured locally) and
connection cables in the wall.
ԙ Mount the lower casing of the interface to the
electrical box with M4 screws (procured locally).
Ԛ Mount the upper casing.
Ԙ Mount the mounting bracket to the interface with tapping
screws provided as standard accessory.
ԙ Mount the mounting bracket on wall or the like with wood
screws provided as standard accessory.
Ԛ Mount the mounting bracket to a wall surface, etc.
using the wood screws provided.
غ Are the connection cables connected securely to the terminal blocks and connectors?
غ
Are the thickness and length of the connection cables conformed with the standard?
Installation of the interface
Ԙ
Recess the electrical
box and connection cables
ԙ
Mount the mounting
bracket on the interface
with 2 of tapping screws
Ԛ
Mount the bracket on
a wall or a pillar with
2 of wood screws
-
5
-
#