-
12
-
It is possible to finish by pressing ON/OFF button on the way, but unfinished change of setting is
unavailable.
During setting, if you press (RESET) button, you return to the previous screen.
Setting is memorized in the control and it is saved independently of power failure.
How to check the current setting
When you select from "No. and funcion" and press set button by the previous operation, the "Setting" displayed first is
the current setting.
(But, if you select "ALL UNIT ", the setting of the lowest number indoor unit is displayed.)
Operation message
Function description: ,
setting description:
Function No.
Fixing button
Finishing button
7)
2)
1)
Starting button
Previous screen button
Indoor unit selection button
"DATA LOADING" (Blinking for 2 to 23 seconds to read the data)
(1)
(2)
(3)
On the occasion of indoor unit function selection
Press or button.
Select the setting.
Press (SET) button.
Press (SET) button.
Press or button.
Press or button.
Select the number of the indoor unit you are to set
If you select "ALL UNIT ", you can set the same
setting with all unites.
Indication is changed to "01 AUTO FILTER CLEANING".
Go to .
[Note]
If plural indoor units are connected to a remote control,
the indication is "I/U 000" (blinking) The lowest
number of the indoor unit connected is indicated.
"No. and function" are indicated by turns on the indoor unit
function table, then you can select from them.
(For example)
The current setting of selected function is indicated.
(For example) "STANDARD" If "02 FAN SPEED SET"
is selected.
Press (SET) button.
"SET COMPLETE" will be indicated, and the setting will be
completed.
Then after "No. and function" indication returns, set as the same
procedure if you want to set continuously , and if to finish, go to 7).
When plural indoor units are connected to a remote control,
press the AIRCON NO. button, which allows you to go back
to the indoor unit selection screen. (example "I/U 000 ")
Function No.
Function
Setting
Press or button.
Make sure which do you want to set, " FUNCTION "
(remote control function) or "I/U FUNCTION " (indoor
unit function).
2)
1)
3)
4)
5)
Stop air-conditioner and press (SET) (MODE)
buttons at the same time for over three seconds, and the
"FUNCTION SET " will be displayed.
Press (SET) button.
Selecct " FUNCTION " (remote control function) or
"I/U FUNCTION " (indoor unit function).
Press (SET) button.
6)
"DATA LOADING" (Indication with blinking)
Display is changed to "01 GRILLE SET".
7)
Press (SET) button.
On the occasion of remote control function selection
Press or button.
"No. and function"are indicated by turns on the remote
control function table, then you can select from them.
(For example)
Press or button.
Select the setting.
The current setting of selected function is indicated.
(for example) "AUTO RUN ON" If "02 AUTO
RUN SET" is selected
Press (SET)
"SET COMPLETE" will be indicated, and the setting
will be completed.
Then after "No. and function" indication returns, Set as
the same procedure if you want to set continuously ,and
if to finish, go to 7.
Press ON/OFF button.
Setting is finished.
Setting
Function No.
Function
6)-
8
(4)
How to set function
Summary of Contents for SC-BIKN-E
Page 6: ... 4 Deleted ...
Page 11: ... 9 ...
