9. To remove the high pressoure switch (63H)
(1) Remove the lid of control box.(See No.2)
(2) Disconnect the 63H connector(CNQ1)
on PCB in control box.
(3) Remove the top panel.(See No.3)
(4) Remove welded part of high pressure
8. To remove the compressor (CM)
switch by welding.
(1) Remove the service panel.(See No.1)
(2) Remove the insulation which covers compressor.
(Strings (a)
(d) should be loosen.)
10. To remove the thermistors (example"Tho-D1")
(3) Remove 3 terminal cover fixing bolts(
mark) and
(1) Remove the lid of control box.(See No.2)
remove it and disconnect the power wiring.
(2) Disconnect the Tho-D1 connector(CNTH) on PCB
(4) Remove welded part of compressor by welding.
in control box.
(
mark)
(3) Remove the top panel.(See No.3)
(5) Remove 3 compressor fixing nuts(
mark) using spanner
(4) Pull out the thermistor"Tho-D1" from the sensor
or adjustable wrench.
holder.
11. To remove the electronic expansion valve
(EEV)
(1) Remove the lid of control box.
(See No.2)
(2) Disconnect the EEV connector(CNEEVx)
on PCB in control box.
(3) Remove the top panel.(See No.3)
(4) Remove the coil of EEV by pull out
on the top.
(5) Remove welded part of EEV by welding.
12. To remove the water heat exchanger
(1) Remove the service panel.(See No.1)
(2) Remove 3 cover A fixing screws and remove it.(
mark, Pic.
)
(3) Remove 3 cover B fixing screws and remove it.(
mark, Pic.
)
(4) Loosen the connection screw of the water piping and remove it.(
mark, Pic.
)
(5) Remove 2 plate fixing screws and remove it.(
mark, Pic.
)
(6) Remove welded part of the water heat exchanger by welding.(
mark, Pic.
)
(7) Remove 4 water heat exchanger fixing screws and remove it.(
mark, Pic.
)
PROCEDURE & PICTURES
(a)
(b
(c)
(d
Terminal cover
Cover A
Cover B
Water heat exchanger
Coil of EEV
EEV
'14 • KX-SM-200
–
15
2
–
Summary of Contents for FDC1000KXZWE1
Page 171: ... 14 KX SM 200 169 ...
Page 172: ... 14 KX SM 200 170 ...
Page 173: ... 14 KX SM 200 171 ...
Page 174: ... 14 KX SM 200 172 ...