OPERATING PROCEDURE
PHOTOS/FIGURES
4. Removing the R32 sensor
(1) Remove the intake grille. (Refer to Procedure 1)
(2) Remove the 2 screws of the sensor cover. (Refer to Photo
4-1)
(3) Disconnect the white connector CN1 on the R32 sensor.
(4) Unlock the catch
1
of the holder, and remove the R32
sensor. (Refer to Photo 4-2)
<Installing the R32 sensor>
(1) Put the R32 sensor through the catch
2
.
(2) Fix the R32 sensor with the catch
1
to install it into the
holder.
Photo 4-1
Photo 4-2
Photo 4-3
30
31
OCH724
Sensor cover
Screws
Connector
Catch
1
Catch
2
R32 sensor
