47
OCH724
Settings menu
Service menu:
Function setting
Rotation setting
Function setting
Cursor
Cursor
Select:
Ref. address
Mode 1
1
/2/3
Grp. (1/4)
Mode 2
1
/2/3
Mode 3
1
/2/3
Mode 4
1
/2/3
Function setting
Cursor
Cursor
Select:
Ref. address
Mode 7
1
/2/3
Unit#1 (1/4)
Mode 8
1
/2/3
Mode 9
1
/2/3
Mode10
1
/2/3
Function setting
Ref. address
Sending data
2.
Set the indoor unit refrigerant addresses and unit numbers with the
F1
through
F4 buttons, and then press the [ ] button to confirm the current
setting.
3.
When data collection from the indoor units is completed, the current settings
appears highlighted. Non-highlighted items indicate that no function settings
are made. Screen appearance varies depending on the "Unit No." setting.
4. Use the F1 or F2 button to move the cursor to select the mode number, and
change the setting number with the
F3 or F4 button.
5.
When the settings are completed, press the [
] button to send the setting
data from the remote controller to the indoor units.
6.
When the transmission is successfully completed, the screen will return to the
Function setting screen.
<The display format and the setting method vary with indoor units.>
Pattern 1
12-5.
FUNCTION SETTING
12-5-1. PAR-41MAA
Select ˝Function setting˝, and press the [
] button.
Select ˝Setting˝ from the Service menu, and press the [
] button.
1.
Select ˝
Service
˝ from the Main menu, and press the [
] button.
F1
F2
F3
F4
F1
F2
F3
F4
F1
F2
F3
F4
