24
Specifications are subject to change without notice.
© 2021 Mitsubishi Electric US, Inc.
Dehumidifier
Note:
●
The system must be configured with a Wireless Temperature and Humidity Sensor and it must be installed
in order to use a humidifier or dehumidifier. See the
Add Wireless Sensor
section.
●
If an MHK2 controller is present and configured to relay its own room temperature and humidity.
reading, kumo cloud uses humidity readings from the MHK2 instead of the Wireless Sensor to control a
dehumidifier, display humidity readings in the app, etc.
Add kumo station Accessory. Then,
1. Select the
Mode
for the dehumidifier.
OFF
- Disable the dehumidifier.
- Auto : Runs the dehumidifier as needed to meet the target relative humidity percentage.
2. Set the target relative humidity percentage for
Auto mode
. See the
Save Unit Settings
section. Tap
Next
.
3. Select the zone that will provide the humidity reading.
*Note: This zone must have been previously
configured with a Wireless Sensor
. Zones with connected MHK2 controllers also appear as options in
the list of zones that provide humidity readings e.g.MHK2: Living Room and Wireless Sensor: Bedroom.
4. Tap
Next
.
5. Verify settings and tap
Save
.
Home
Program
Back
Now:
30
%
Mode:
Auto
Auto Setting:
35%
OFF
35%
40%
1
Dehumidifier
30%
45%
2
NEXT
Dehumidifier
Home
Program
SAVE
Sensor:
KKiittcchheenn
Outside air temperature: 73°
Wired to Kitchen interface
Channel 4, sensor
Auto setting:
5
Home
Program
NEXT
Outside air temperature:
73°
Which remote sensor
affects the dehumidifier?
Kumo sense : Kitchen
Dehumidifier
33
4
