11
© 2021 Mitsubishi Electric US, Inc.
Specifications are subject to change without notice.
Finish Setup
Save Unit Settings
Signal:
Strong
Auto Mode:
No
Display Offset:
0º
Connect
Program
Settings
Home
Cancel
Back
Living Room
SAVE
ADVANCED
3
2
1
Jones's House:
22 ZZoonneess
Are there more indoor units to
connect?
Connect
Program
Settings
Home
YES
NO
4
1. The name of the newly added unit is listed here. The signal strength shown is the wireless network
connection between the Wireless Interface and the local wireless router. If there is a
Very Weak Signal
or
No Signal
, consider relocating the Wireless Interface, relocating the router, adding a repeater, or use
a Mitsubishi Electric IT Extender (PAC-WHS01IE-E). The Wireless Interface signal generally reaches
beyond the average size of a home without interference or obstructions.
2. Enabling
Auto Mode
allows the new unit to regulate its heating and cooling without the direct interaction
of the user. The unit will be able to operate automatically within a range of selected temperature values.
Note: The dual-setpoint Auto mode scheme that kumo cloud
®
uses is not compatible with the single-setpoint
Auto mode available on other controllers.
3. Many applications will not require any additional settings. If desired, tap
Display Offset
or
Advanced
to
customize settings further. For more details, see the
Advanced Indoor Unit Settings
section.
Tap
Save
.
4. If there are more indoor units, tap
Yes
. Repeat the steps beginning in the
Add Unit
section on for each
unit until they are all added.
