74
●
When using the extension module, also set the parameters of the extension module.
For the parameters of the extension module, refer to the following:
Manual for the extension module used
●
Set all the items for the parameter. If any blank exists, the parameters cannot be written to the D/A converter module.
●
To read the parameters from the D/A converter module, set "Method selection" to "Parameter read" and click
button.
●
The parameters are checked when they are written to the D/A converter module. If the following message is displayed
during the writing, take corrective action for the error code in < >. For details on the error codes, refer to the list of error
codes (
Page 153, Section 11.2) and the user’s manual of the master/local module used.
