159
OPERATING PROCEDURE
PHOTOS
2. Removing the relay panel.
(1) Remove the cabinet. (Refer to 1)
(2) Disconnect the following connectors.
. Compressor (MC1,MC2)
. Outdoor fan motor
. Solenoid coil (21R1,21R2,21R3,21R4,21RA,21RB)
3. Removing the propeller.
(1) Remove the cabinet.
(2) Remove the propeller nut.
(3) Remove the propeller.
Note
: Loosen the propeller in the rotating direction for removal.
When setting the propeller, align the motor-shaft cut
section.
4. Removing the outdoor fan motor.
(1) Remove the cabinet. (Refer to 1)
(2) Remove the propeller. (Refer to 3)
(3) Disconnect the connector remove the clamp of outdoor fan
motor lead wire.
(4) Remove the screws fixing the outdoor fan motor.
Photo 4
Photo 5
Photo 6
Propeller nut
Propeller
Compressor connector
(MC1,MC2)
Solenoid coil connector
(21R1,21R2,21R3,21R4)
Solenoid coil connector
(21RA,21RB)
Screws
Outdoor fan motor
set screws
Outdoor
fan
motor
Clamp