73
2. PROJECT CREATION
2.1 Project file operation
1
2
3
4
5
6
7
8
9
10
Select [New] from the [Project] menu bar or click on the
on the toolbar to display the "System setting" window.
*1
When the FR-A8NCG is installed, enter the same number as the network No.
NOTE
• To use a communication option for the FR-F700-EC/NA inverter equipped with only one option connector, select the
communication option name from the Connector 2 pull-down list of the model setting field in the "System setting" window.
• When the automatic recognition is performed for the FR-F700-EC/NA inverter with a communication option connected to its
option connector, the communication option name is displayed in the Connector 2 field.
Symbol
Name
Function/description
A
Connection setting
Select the connection type. Select an option or enter an applicable value in [PC-side port], [COM Port
No.], [Through], [St. No. (GOT)], [Detailed setting], [Protocol], [GOT], and [Programmable controller]
setting fields.
B
Model setting
Click the [Auto recognize] button to automatically set the information about the connected inverter. The
model, capacity, and connection option of the inverter can also be selected from the list manually.
C
Inverter network No.
Enter the same value as set in
Ethernet communication network number
.
(For FR-A800-E, FR-F800-E, and FR-E800-(SC)E, refer to
Pr.1424
. For FR-A800-E-R2R, refer to
Pr.1073
. For FR-E700-NE, refer to
Pr.830
.)
D
Auto recognize
Information of the connected inverter can be recognized automatically. (Refer to
.)
E
Network setting...
Specify the settings for network connection.
F
Clear
Clears the entries in the model setting field.
G
Filter by model...
Shows the window to filter the list of models used for the model selection.
H
Help
Displays the help window.
I
OK
Applies the setting to the project and closes the "System setting" window.
J
Cancel
Closes the "System setting" window without applying the setting to the project.
H
A
B
I
D
F
C
G
E
