Mitsubishi Electric Melservo-Jet MR-JET G-N1 Series, User Manual

Page: 63 / 140

6 OPTIONS AND PERIPHERAL EQUIPMENT
6.1 Cables/connector sets
61
6
Ethernet cable
For Ethernet cables used for network wiring, refer to "Communication specifications" in the User's Manual (Communication
Function).
A commercially available product example is as follows. For the latest product information, contact the manufacturer.
For commercial cables other than the above, refer to the CC-Link Partner Association website.
https://www.cc-link.org/en/
Precautions
• When branching the CC-Link IE TSN network using a switching hub, use a switching hub (Class B) that is recommended by
the CC-Link Partner Association. Although a switching hub (Class A) can also be used, there are restrictions on the type of
topology that can be used. For further information, refer to "MELSEC iQ-R Motion Module User's Manual (Startup)".
• When branching the CC-Link IE Field Network Basic network using a switching hub, use a switching hub with a
transmission speed of 100 Mbps or more. When using a switching hub without the auto-negotiation function, set the
transmission speed to 100 Mbps and half duplex.
Product name Model Specifications
Ethernet cable For indoor use SC-E5EW-S_M "_" in the model represents the cable length (0.5 m,
1 to 100 m (in 1 m increments)). Double shielded (Category 5e)
For moving parts
used indoors SC-E5EW-S_M-MV "_" in the model represents the cable length (0.1,
0.2, 0.3, 0.5 m, 1 to 45 m (in 1 m increments)).
For indoor and
outdoor use SC-E5EW-S_M-L "_" in the model represents the cable length (1 to
100 m (in 1 m increments)).