Mitsubishi Electric MELSEC iQ-F Series, User Manual

Page: 30 / 190

28
2 SPECIFICATIONS
2.2 Power Supply Specifications
2.2
Power Supply Specifications
The CPU module power supply specifications are explained below.
For the consumption current of extension modules, refer to

Page 39 PRODUCT LIST or manuals of each extension
module.
AC power supply type
*1 This item shows value when all 24 V DC service power supplies are used in the maximum configuration connectable to the CPU
module. (The current of the input circuit is included.)
*2 When I/O modules are connected, they consume current from the 24 V DC service power supply.
For details on the 24 V DC service power supply, refer to

Page 56 Limitation on Current Consumption.
The following shows the power failure detection time of the AC power supply type.
Item Specifications
Rated voltage 100 to 240 V AC
Voltage fluctuationge range -15%, +10%
Frequency rating 50/60 Hz
Allowable instantaneous power failure time Operation can be continued upon occurrence of instantaneous power failure for 10 ms or less.
When the supply voltage is 200 V AC or higher, the time can be change to 10 to 100 ms by editing the user
program.
Power fuse 250 V, 3.15 A Time-lag fuse
Rush current FX5UJ-24M  25 A max. 5 ms or less/100 V AC
50 A max. 5 ms or less/200 V AC
FX5UJ-40M  ,
FX5UJ-60M 
30 A max. 5 ms or less/100 V AC
50 A max. 5 ms or less/200 V AC
Power consumption
*1
FX5UJ-24M  30W
FX5UJ-40M  32W
FX5UJ-60M  35W
24 V DC service power
supply capacity
*2
FX5UJ-24M  400 mA (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU module )
460 mA (Supply capacity when external power supply is used for input circuit of the CPU module)
FX5UJ-40M  400 mA (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU module )
500 mA (Supply capacity when external power supply is used for input circuit of the CPU module)
FX5UJ-60M  400 mA (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU module )
550 mA (Supply capacity when external power supply is used for input circuit of the CPU module)
*1
1 scan time
Power failure
detection time
SD8008
10 to 13 ms
Approx.
3 ms
t *1
AC power supply
(AC detection)
t: time (as a guideline)
100 V AC: 0 ms to approximately 60 ms
200 V AC or higher: 0 ms to approximately 100 ms
SM8000:
SM8007:
SM8008:
RUN monitor
Momentary
power failure
detection
Power failure
detected