Mitsubishi Electric MELSEC iQ-F Series, User Manual

Page: 26 / 190

24
1 OUTLINE
1.1 Part Names
With cover open
When the terminal block covers are open
No. Name Description
[1] Built-in Ethernet communication
connector Connector for connection with Ethernet-compatible devices.
For details, refer to
 MELSEC iQ-F FX5 User's Manual (Ethernet Communication).
[2] RUN/STOP/RESET switch Switch for operating the CPU module. (

Page 129 Methods of running, stopping, and resetting)
RUN: Runs the program
STOP: Stops the program
RESET: Resets the CPU module (hold the switch on the RESET side for approximately 1 second.)
[3] SD memory card disable switch Switch for disabling access to the SD memory card when the card is to be removed.
[4] Built-in USB communication
connector Connector for connection with engineering tool.
[5] SD memory card slot Slot for inserting an SD memory card.
[6] Terminal names The signal names for power supply, input and output terminals are shown.
shows a function grounding terminal.
[7] Expansion board connector Connector for connecting an expansion board.
[8] Extension connector Connector for connecting the extension cable of an extension module.
No. Name Description
[1] Terminal block mounting screws Gradually loosen the left and right screws (alternately), and remove the top of the terminal blocks.
[2] Terminal Terminals for power, input, and output.
For details on the terminal layout, refer to
 Page 37 Terminal Layout.
[1]
[7]
[8]
[2]
[3]
[4]
[6]
[5]
[1]
[1]
[2]
[2]